Chlorinated Polyethylene (CPE) | Sanyo Corporation of AmericaChlorinated Polyethylene (CPE) is widely used as a thermoplastic elastomer (TPE), rubber and modifier for resins (PVC, PE and ABS) because of its excellent
CPE (Chlorinated Polyethylene) Alloys | Aurora PlasticsCPE is the standardized acronym for thermoplastic chlorinated polyethylene elastomer, which is produced by chlorination of polyethylene. The chlorine content Chlorinated Plastic (PVC, CPE, CPVC, Neoprene) - Chemical Poly(vinyl chloride), PVC, is the third-most widely produced polymer, after polyethylene and polypropylene. · PVC comes in two basic forms: rigid (sometimes
chlorinated polyethylene density | ||||||||
N | HS | pH | MW | Fe | Mf | CAS | Name | |
99.5% | - | - | - | - | - | - | - | - |
(99.5%min) | - | - | - | - | - | Nh4cl | - | - |
99.5 | - | 28271090 | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - |
30% | - | - | - | - | - | - | 1327-41-9 | - |
99.6%Min | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - |
25kg/Bag | - | - | - | - | - | - | - | - |
99.7% | - | - | - | - | - | - | - | Zinc Oxide |
20ppm | - | - | - | - | 20 30 Ppm | - | - | - |
99.5% | - | - | - | - | - | - | - | - |
12125-02-9 | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - |
25.4% | - | - | - | - | - | - | - | - |
99.5% | - | - | - | 194.184 | - | - | 12125-02-9 | Ammonium Chloride |
99.6% | - | - | - | - | - | - | 144-62-7 | - |
Nh4cl | - | - | - | - | - | - | - | - |
80% | - | - | - | - | - | - | - | - |
100% | - | - | 5-7 | - | - | - | - | - |
15245-12-2) | - | - | - | - | - | - | - | - |
32/Urea | - | - | 5.5-7.0 | - | - | - | - | - |
50kg | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - |
(NH4) | 20.5% | - | - | - | - | - | - | - |
Chlorinated polyethylene - WikipediaChlorinated polyethylene (PE-C or CPE) is an inexpensive variation of polyethylene, where chlorine is substituted for some of the hydrogen atoms.
Chloropolyethylene (CM, CPE) - Polymer DatabaseAn important manufacturer of chlorinated polyethylene elastomers (CPE) is Dow Chemical who sells the resin under the trademark TYRIN™. Applications. CPE Oil Resistance: Fair/GoodTemp. Range, °C: -40 / 150Heat Resistance: GoodAbrasion Resist: Very GoodChlorinated Polyethylene - CPE - AZoMMainly used as impact modifier for PVC or compounded with LDPE or HDPE film to improve toughness. Films used as pond liners and for agricultural applications.
Plastic materials: chlorinated polyethylene (CPE), chlorinated by G Akovali · 2012 · Cited by 12 — CSPE is flame resistant. It is superior to polychloroprene (neoprene) in overall properties, and inferior to, but more cost-effective than, silicone or fluoro- Chlorine content: 25–42% by weight (can be Density: 1.16 g/cm3Chlorinated Polyethylene (CPE) Health & EnvironmentChlorinated Polyethylene is a family of thermoplastics. Used as a thermoplastic elastomer (TPE), rubber and modifier for resins. Produces toxins when burnt.
Chlorinated Polyethylene (CPE) versus Polyvinyl Chloride Description: Chloraloy® is made from chlorinated polyethylene (CPE). Most other shower pan liners are made from polyvinyl chloride (PVC).1 pageChlorinated Polyethylene CPE - RHD Polymer & ChemicalChlorinated Polyethylene (CPE) is a high molecular weight polymer that is produced by the Chlorination of HDPE. It is a white thermoplastic elastomer in powder
Related Products
Copyright © 2017 - 2024Granular Organic Fertilize Manufacture All Rights Reserved